 |
|
Issue Archives
|
Summer 2009 |
|
|
|
 From the Editor: Milestone Reached—Do What You Said
Table of Contents
Hypereutectic Al-Si Alloys: Practical Casting Considerations, J. Jorstad, J.L.J. Technologies, Inc., D. Apelian, Worcester Polytechnic Institute
Thermal and Microstructural Analysis of an A356 Aluminum Alloy Solidified Under the Effect of Magnetic Stirring, S. Ordonez and O. Bustos, Universidad de Santiago de Chile, R. Colas, Universidad Autonoma de Nuevo Leon
Advances in Aluminum Foundry Alloys for Permanent and Semi-Permanent Mold Casting, J. Major and M. Hartlieb, Rio Tinto Alcan
The Effect of the Melt Temperature and the Cooling Rate on the Microstructure of the Al-20% Si Alloy Used for Monolithic Engine Blocks, W. Kasprzak and M. Sahoo, CANMET Materials Technology Laboratory, J. Sokolowski, Univ. of Windsor, H. Yamagata and H. Kurita, Yamagata and H. Kurita, Yamaha Motor Co. Ltd.
Metalcasting Industry Research
|
|
|
Spring 2009 (Volume 3, Issue 2) |
|
|
|
 From the Editor: Don't Gamble with Your Future
Table of Contents
Characterization of the Flow Behavior of Near Eutectic Composition Aluminum-Silicon Alloys, N. Tonmukayakul and M. Makhlouf, Worcester Polytechnic Institute, S. Shankar, McMaster Univ.
Behavior of Chemically Bonded Molding Sands in Dry Air, J. Zych, AGH-Univ. of Science & Technology
Development of New Al-Cu Based Alloys Aimed at Improving the Machinability of Automotive Castings, E. Elgallad, F. Samuel and A. Samuel, Univ. du Quebec a Chicaoutimi, H. Doty, General Motors Powertrain Group, Metal Casting Technology, Inc.
A New Method for Development of Pourous Gray Cast Iron Castings, S. Dawood, N.G.P. Institute of Technology, M. Nazirudeen, P.S.G. College of Technology
Optimising of Moulding Parameters for Green Sand Compaction by Computer Simulation and a New Compaction Measuring Device, J. Blast and A. Kadauw, Technical Univ. Bergakademie, A. Malaschkin, AG Leipzig
AFS Research Development Advancements
Metalcasting Industry Research
|
|
|
Current Issue |
|
|
|
From the Editor: Milestone Reached—Do What You Said
Table of Contents
Hypereutectic Al-Si Alloys: Practical Casting Considerations, J. Jorstad, J.L.J. Technologies, Inc., D. Apelian, Worcester Polytechnic Institute
Thermal and Microstructural Analysis of an A356 Aluminum Alloy Solidified Under the Effect of Magnetic Stirring, S. Ordonez and O. Bustos, Universidad de Santiago de Chile, R. Colas, Universidad Autonoma de Nuevo Leon
Advances in Aluminum Foundry Alloys for Permanent and Semi-Permanent Mold Casting, J. Major and M. Hartlieb, Rio Tinto Alcan
The Effect of the Melt Temperature and the Cooling Rate on the Microstructure of the Al-20% Si Alloy Used for Monolithic Engine Blocks, W. Kasprzak and M. Sahoo, CANMET Materials Technology Laboratory, J. Sokolowski, Univ. of Windsor, H. Yamagata and H. Kurita, Yamagata and H. Kurita, Yamaha Motor Co. Ltd.
Metalcasting Industry Research
|
|
|
Current Issue |
|
|
|
 From the Editor: Your Personal Library
Table of Contents
Tensile, High Strain Rate Compression and Microstructural Evaluation of Lightweight Age Hardenable Cast Fe-30Mn-9Al-XSi-0.9C-0.5Mo Steel, R. Howell and T. Weerasooriya, Army Research Lab, Aberdeen Proving Grounds, D. Van Aken, Missouri Univ. of Science and Technology
Development of a Lead=-Free Bearing Material for Aerospace Applications, J. Thomson, R.Zavadil and M. Sahoo, CANMET-Materials Technology Laboratory, A. Dadouche, W. Dmochowski and M. Conlon, Gas Turbine Laboratory
The Use of the Weibull Statistical Method to Assess the Reliability of a Develoment Engineered Casting Component, R. MacKay, Nemak of Canada Corp., D. Szablewski, Transportation Technology Center
On the Mechanism of Modification of the Aluminum-Silicon Eutectic by Strontium: The Role of Nucleation, M. Makhlouf, Worcester Polytechnic Institute
Experimental Investigation on the Effect of Copper Upon Eutectoid Transformation of As-Cast and Austenitized Spheroidal Graphite Cast Iron, J. Sertucha and P. Larranaga, AZTERLAN, J. Lacaze, Universite de Toulouse, M. Insausti, Universidad del Pais Vasco
AFS/FEF Student Technology Competition
Metalcasting Industry Research
|
|
|
Winter 2009 |
|
|
|
 From the Editor: Google Me
Table of Contents
Analysis of Mold Filling in Lost Foam Casting of Aluminum: Part II-Example Applications, D. Caulk, General Motors Research and Development Center
Characterization of Zircon-Based Slurries for Investment Casting, J. Bundy and S. Viswanathan, The Univ. of Alabama
A Comparative Study of Porosity and Pore Morphology in a Directionally Solidified A356 Alloy, S. Akhtar and L. Arnberg, NTNU, M. DiSabatino, D. Dispinar and M. Syvertsen, SINTEF Materials and Chemistry
AFS Sponsored Research
SIC-The Most Efficient Addition to Increase the Nodule Count in Ductile Iron, M. Popescu, R. Zavadil and M. Sahoo, CANMET Materials Technology Laboratory
Technical Forum-Reader & Author Dialogue
Metalcasting Industry Research
|
|
| | << Start < Prev 1 2 Next > End >>
| | Results 1 - 9 of 11 |
|
|
|
Issue Archives