|
|
Issue Archives
|
Winter 2009 |
|
|
|
From the Editor: Google Me
Table of Contents
Analysis of Mold Filling in Lost Foam Casting of Aluminum: Part II-Example Applications, D. Caulk, General Motors Research and Development Center
Characterization of Zircon-Based Slurries for Investment Casting, J. Bundy and S. Viswanathan, The Univ. of Alabama
A Comparative Study of Porosity and Pore Morphology in a Directionally Solidified A356 Alloy, S. Akhtar and L. Arnberg, NTNU, M. DiSabatino, D. Dispinar and M. Syvertsen, SINTEF Materials and Chemistry
AFS Sponsored Research
SIC-The Most Efficient Addition to Increase the Nodule Count in Ductile Iron, M. Popescu, R. Zavadil and M. Sahoo, CANMET Materials Technology Laboratory
Technical Forum-Reader & Author Dialogue
Metalcasting Industry Research
|
|
|
Fall 2008 |
|
|
|
From the Editor: The Three Legged Stool
Table of Contents
AFS Sponsored Research
Quantification of Casting Skin in Ductile and Compacted Graphite Irons and Its Effect on Tensile Properties, D. Stefanescu, S. Wills and J. Massone, The Ohio state Univ., F. Duncan, Ashland Casting Solutions
Adapting More Progressive Refractory Coating Measurement Controls, M. Joyce, M. Rebros and S. Ramrattan, Western Michigan Univ.
Prediction of Hot Tear Formation in a Magnesium Alloy Permanent Mold Casting, M. Pokorny, C. Monroe and C. Beckermann, Univ. of Iowa, L. Bichler and C. Ravindran, Ryerson Univ.
Transformation Kinetics and Ferrite-Pearlite Ratios in a 65-45-12 Ductile Iron, C. Samuel and S. Viswanathan, The Univ. of Alabama
Metalcasting Industry Research
Metalcasting University Profile
AFS/FEF Student Technology Competition
|
|
|
Spring 2008 |
|
|
|
From the Editor: Your Comments Are Welcome
Table of Contents
Comparative Study of Fatigue Endurance Limit for 4 and 6 MM Thin Wall Ductile Iron Castings, C. Labreque, M. Gagne and P.M. Cabanne, Rio Tinto Iron & Titanium, C. Francois, C. Becret and F. Hoffmann, PSA Peugeot Citroen
The Modification of Al-Si Casting Alloys: Important Practical and Theoretical Aspects, G. Sigworth, Alcoa Primary Metals
Technical Communication Fatigue Fracture of Ductile Cast Irons, J. Campbell, Univ. of Birmingham
Effect of High Thermal Conductivity Die Steel in Aluminum Casting, M. Ayabe, K. Shibata, H. Nozute, T. Nagaoka, Honda Motor Co., Ltd.; H. Koyama, Honda Engineering Co., Ltd.; K. Ozake, T. Yanagisawa, Daido Steel Co., Ltd.
Experimental Observations of Dendrite Coarsening & Al-Si Eutectic Growth in Progressively Quenched Structures of Al-Si-Cu Casting Alloys, R. Mackay, Nemak Engineering Centre, J. Sokolowski, Univ. of Windsor
Metalcasting Industry Research
|
|
|
Winter 2008 |
|
|
|
From the Editor: Welcome Back, Tom Prucha
Table of Contents
Age Strengthening of Gray Iron-Kinetics Study, V. Richards, T. Anish, S. Lekakh and D. Van Aken, Univ. of Missouir-Rolla; Wayne Nicola, Consultant
Pressure Assisted Process for High Integrity Aluminum Castings, J. Jorstad, JLJ Technologies, Inc; D. Apelian, Metal Processing Institute, WPI
Influence of Mold and Pouring Temperatures on Hot Tearing Susceptibility of AZ91D Magnesium Alloy, L. Bichler, A. Elsayed, K. Lee and C. Ravindran, Ryerson Univ.
Recent Developments on Ultrasonic Cavitation Based Solidification Processing of Bulk Magnesium Nanocomposites, G. Cao, H. Konishi and X. Li, Univ. of Wisconsin-Madison
Technical Development
Report Permanent Mold Casting of Titanium Alloy TI-6AL-4V, M. Sadayappan and M. Sahoo, CANMET-MTL; C. Lavender, Pacific Northwest National Lab; P. Jablonski, Albany Research Centre
Metalcasting Industry Research
|
|
|
Fall 2007 |
|
|
|
From the Editor: Welcome to the IJMC, Tom Prucha
Table of Contents
Keynote Paper: Leakage Defects via Bubble Trails in Grey Iron Castings,
J. Campbell, University of Birmingham, UK
The Engineering Profession in the 21st Century-Educational Needs and Societal Challenges Facing the Profession, Diran Apelian, Howmet Professor of Engineering, Director, Metal Processing Institute
Grain Refinement of Aluminum Casting Alloys, G.K. Sigworth, T.A. Kuhn, Alcoa Primary Metals
Evaluation of Fatigue Strengths of Continuously Cast Ductile Irons, P.R. Gangasani, Dura Bar, a Division of Wells Manufacturing Company
AFS Research Report: Enabling Technology for the Design of Short Fiber Reinforced Aluminum MMC Components, Gerald A. Gegel, Material & Process Consultancy; David J. Weiss, Eck Industries, Inc.
Metalcasting Industry Research
|
|
| | << Start < Prev 1 2 Next > End >>
| | Results 10 - 16 of 16 | |
|
|